Loading... Please wait...
QUICK START GUIDE For All Systems
Use to add head and tail lights to any 1:12 to 1:8 size R/C car or truck with 6 extra constant LED channels for adding additional running lights (fog, under-glow, cab marker, or dual head and tail lights).
| Step-by-Step | LED-to-Connector | Wiring Diagram | Complete Set (.PDF) |
| Standard 10 LED Controller | LED-to-Body | LED Specs |
Use to add head and dual-intensity brake lights to any 1:12 to 1:8 size R/C car or truck with 4 extra constant LED channels for adding additional headlights or fog lights and 2 extra switched LED channels for adding additional brake lights. EBS switch is included for dual-intensity brake light action, just like a real car.
| Step-by-Step | LED-to-Connector | Electronic Brake Switch | LED Specs |
| Standard 10 LED Controller | LED-to-Body | Wiring Diagram | Complete Set (.PDF) |
Use to add dual head (4 headlights total) and dual-intensity brake lights lights to any 1:12 to 1:8 size R/C car or truck. No extra channels, with included microBRAKE™ - 6 LED controller. This controller has EBS functionality built right in for a streamlined installation on the most common setup for R/C cars & trucks.
| Step-by-Step | LED-to-Connector | Wiring Diagram | Complete Set (.PDF) |
| microBRAKE™ 6 LED Controller | LED-to-Body | LED Specs |
Use to add dual head (4 headlights total), fog lights, adjustable rate turn signals, and dual-intensity brake lights to any 1:12 to 1:8 size R/C car or truck. No extra channels, with included TURNBRAKE™ - 14 LED controller. This controller has headlight strobe, turn signal, and EBS (electronic brake switch) functionality built right in for a streamlined installation of a common LED setup for R/C cars & trucks.
| Step-by-Step | LED-to-Connector | Wiring Diagram | Complete Set (.PDF) |
| TURNBRAKE™ 14 LED Controller | LED-to-Body | LED Specs |
Use to add dual headlight strobes (4 headlights total, fully adjustable), alternating roof strobe lights, and dual-intensity brake lights to any 1:12 to 1:8 size R/C car or truck. No extra channels, with included 911STROBE™ - 14 LED controller. This controller has headlight strobe, roof strobe, and EBS (electronic brake switch) functionality built right in.
| Step-by-Step | LED-to-Connector | Wiring Diagram | Complete Set (.PDF) |
| 911STROBE™ 14 LED Controller | LED-to-Body | LED Specs |
Use to add running-board side-marker lights to any 1:12 to 1:8 size R/C truck. No extra channels, with included STANDARD - 10 LED controller.
| Step-by-Step | LED-to-Connector | Wiring Diagram | Complete Set (.PDF) |
| Standard 10 LED Controller | LED-to-Body | LED Specs |
Use to add headlights to any 1:12 to 1:8 size R/C car or truck with 1 extra constant LED channel for adding an additional headlight. RPS switch is included for turning the headlights on/off from a 3rd channel on the RX. RPS has a set of spare output pins for switching up to 6 LEDs using #5499 below.
| Step-by-Step | LED-to-Connector | Remote Power Switch | LED Specs |
| RX Direct2LED™ 3 LED Controller | LED-to-Body | Wiring Diagram | Complete Set (.PDF) |
Use to add electronic brake lights to any 1:12 to 1:8 size R/C car or truck with 1 extra constant LED channels for adding an additional brake light. EBS switch is included for dual-intensity brake light action, just like a real car.
| Step-by-Step | LED-to-Connector | Electronic Brake Switch | LED Specs |
| RX Direct2LED™ 3 LED Controller | LED-to-Body | Wiring Diagram | Complete Set (.PDF) |
Use to add headlights to any 1:12 to 1:8 size R/C car or truck with 1 extra constant LED channel for adding an additional headlight.
| Step-by-Step | LED-to-Connector | Wiring Diagram | Complete Set (.PDF) |
| RX Direct2LED™ 3 LED Controller | LED-to-Body | LED Specs |