Loading... Please wait...



Lights are designed to be used in extreme nighttime and low visibility running environments and are very high output.

DO NOT look directly
into beam.

Our Newsletter

Subscribe to receive
New Product Release &
Promotional e-mails.

Support Navigation

TYPICAL LED MOUNTING LOCATIONS FOR AIRCRAFT AND HELICOPTERS

8 LED Helicopter Navigation Lights 12 LED Helicopter Navigation Lights  

8 LED SETUP

(1) OPTIONAL Landing Lights (RCL5412E)

(2) Red Strobe (Rotating Beacon)

(3) Constant Navigation (Green RIGHT; Red LEFT)

(4) White Strobes

(5) Constant White Tail

12 LED SETUP

(1) Landing Lights WHITE

(2) Rotating Beacon RED

(3) Constant Navigation (Green RIGHT; Red LEFT)

(4) Strobe 1 WHITE

(5) Constant Tail WHITE, Strobe 2 WHITE

14 LED SETUP

(1) Landing Lights WHITE

(2) Rotating Beacon RED

(3) Constant Navigation (Green RIGHT; Red LEFT)

(4) Strobe 1 WHITE

(5) Strobe 2 WHITE

8 LED Airplane Navigation Lights 12 LED Airplane Navigation Lights 14 LEDAirplane Navigation Lights

QUICK START GUIDE For All Systems

#5300 3 LED NAVIGATION WITH WHITE TAIL STROBE

Use to add red, green navigation; and 1 white strobe light to any 48" span R/C airplane, helicopter, or boat. Use wire extensions for larger scale craft.

Step-by-Step LED-to-Connector Wiring Diagram Complete Set (.PDF)
RX Direct2LED™ 3 LED Controller LED-to-Canopy LED Specs

 

#5316 6 LED NAVIGATION WITH 2 WHITE & 1 RED STROBE

Use to add red, green, white navigation; and 2 white, 1 red strobe lights to any 28" span R/C airplane, helicopter, or boat with 4 extra constant LED channels for adding accessory lights (additional nav, additional strobes, or landing lights using #5412-E below). Use wire extensions for larger scale craft.

Step-by-Step LED-to-Connector Wiring Diagram Complete Set (.PDF)
Standard 10 LED Controller LED-to-Canopy LED Specs

 

#5324 14 LED NAVIGATION WITH STROBES, BEACON, LANDING

Use to add dual red, dual green navigation; 2 adjustable white tail strobes; 2 adjustable white wingtip strobes; 2 adjustable red rotating beacons; and 4 white landing lights to any 48" span R/C airplane, helicopter, or boat. Use wire extensions for larger scale craft.

Step-by-Step LED-to-Connector Wiring Diagram Complete Set (.PDF)
NIGHTFLY™ 14 LED Controller LED-to-Canopy LED Specs

 

#5412-E ELECTRONIC LANDING LIGHTS

Use to add landing lights to any 28" span R/C airplane or helicopter (or dock lights for boats) with 1 extra constant LED channel for adding an additional landing light. RPS switch is included for turning the landing lights on/off from a 3rd channel on the RX. RPS has a set of spare output pins for switching up to 6 LEDs using #5491 below. Use wire extensions for larger scale craft.

Step-by-Step LED-to-Connector Remote Power Switch LED Specs
RX Direct2LED™ 3 LED Controller LED-to-Canopy Wiring Diagram Complete Set (.PDF)

 

#5491 LED SINGLE - WHITE STROBE

Use to add 1 white strobe light to any R/C airplane, helicopter, or boat with 2 extra constant LED channels for adding accessory lights (navigation, landing). 24" wire extension is included. Use wire extensions for larger scale craft.

Step-by-Step LED-to-Connector Wiring Diagram Complete Set (.PDF)
RX Direct2LED™ 3 LED Controller LED-to-Canopy LED Specs