Follow these tutorials to properly configure various RC-LIGHTS system components for advanced use.

Dual RPS

• Independently switch power to the 2 LED banks on the Standard 10 LED Controller (#5051) using two different toggle switches on the transmitter and two Remote Power Switches (#5090).

RPS + EBS

• Use a toggle switch on the transmitter and a Remote Power Switch (#5090) to switch power to the head & fog lights on the Standard 10 LED Controller (#5051) LED BANK 1 and use a Electronic Brake Switch (#5092) to add dual intensity brake light action to LED BANK 2.
• Head & fog ON/OFF; brake ON/DIM

RPS + Separate Power Source

• Use a separate power source to power the Standard 10 LED Controller (#5051) and switch power to LED BANK 2 using a toggle switch on the transmitter and a Remote Power Switch (#5090).
• LEDs will power through the separate power source and NOT the receiver.

microBRAKE™ + Separate Power Source

• Use a separate power source to power the microBRAKE™ 6 LED Controller (#5052).
• LEDs will power through the separate power source and NOT the receiver.

TURNBRAKE™ + Separate Power Source

• Use a separate power source to power the TURNBRAKE™ 14 LED Controller (#5054).
• LEDs will power through the separate power source and NOT the receiver.

911STROBE™ + Separate Power Source

• Use a separate power source to power the 911STROBE™ 14 LED Controller (#5055).
• LEDs will power through the separate power source and NOT the receiver.

NIGHTFLY™ + Separate Power Source

• Use a separate power source to power the NIGHTFLY™ 14 LED Controller (#5056).
• LEDs will power through the separate power source and NOT the receiver.