This is your no-solder LED lighting solution for RPM Light Canisters & RPM Tail Lights!

Use RCL106A to add 6 3mm white LED lights to RPM Roof Canisters to any controller with 6 extra constant LED channels (see #104).

Add-On for #104 to make a 10 LED System

Compatible with RPM Roof-Mounted Light Bar Set RPM80922, RPM80923 & RPM80925 --Direct fit for Slash 4x4, Slash & SC10

To change LED sizes or colors use 5mm or 3mm LEDs. 

This system add-on requires a LED controller and power source. Add-On for #104

If not used with #104 use with Standard 10 LED Controller #5051 or any other LED controller with available channels.

- BRIGHTEST LEDs INDUSTRY WIDE
- SIMPLE & EASY INSTALLATION
- ALL MOUNTING HARDWARE INCLUDED
- FAST BODY REMOVAL
- LIFETIME WARRANTY ON EVERY LED
- LED ADD-ON (LED CONTROLLER REQ.)

Includes

UPC# 813487010390

Specs

TOTAL LED CURRENT DRAW (@6V): 110mA
(A standard servo draws approx. 350mA) 

Blue, Green, White, White Strobe, Red Strobe LEDs
FORWARD VOLTAGE: 3.2V
MAX CURRENT: 30mA 

Amber, Red LEDs
FORWARD VOLTAGE: 1.9V
MAX CURRENT: 30mA 

DIY HOBBYISTS: If connecting LEDs directly to power a current limiting resistor must be installed on each LED or it will blow and void the warranty. (160 ohm @ 6V)

Limited Lifetime Warranty

Every RC-LIGHTS LED is guaranteed against manufacturer defect for the lifetime of the LED (10 TEN Years). All system components are guaranteed against manufacturer defect for 2 TWO Years after the original date of purchase.  Should your LED ever not light contact us immediately and a replacement will be sent right away. Warranty does not cover damage due to powering the LED beyond specified ratings. Warranty does not cover damage due to an incorrect installation. Warranty does not cover normal wear, abuse, neglect, or any damage arising as a result of improper use or modification.

Installation Instructions

Step-by-Step
LED-to-PnP Connector
LED-to-RPM Canister
Wiring Diagram
LED Specs
Complete Set (.PDF)
>>> SUPPORT INDEX <<<