RCL106MB

#106-MB : 6 LED System for RPM Canisters [3MM, 4", 24"]

List:

~~$90.00~~

Your Price:

$69.99

SKU:

RCL106MB

THIS COMPLETE SYSTEM BUNDLES

Guarantee

This is your no-solder LED lighting solution for RPM Light Canisters & RPM Tail Lights!

Use RCL106MB to add 4 3mm white LED lights to either RPM Front Bumper Canisters or RPM Narrow Roof Canisters and 2 3mm red LED lights to RPM Tail Light Canisters with dual-intensity brake light action built right into the included microBRAKE™ - 6 LED controller.

Includes the microBRAKE™ 6 LED Controller with built-in brake light action!

Compatible with RPM Light Canister Set RPM80982 & RPM80983 --Direct fit for Slash 4x4, Slash & SC10 RPM Front Bumpers

Compatible with RPM Narrow Roof-Mounted Light Bar Set RPM80782 & RPM80783

Compatible with RPM Tail Light Set RPM81030 --Direct fit for Slash & SC10

Power directly from the RX or optional battery source

To change headlight or tail light colors use 5mm or 3mm LEDs.

5mm version available; #5006.

Everything needed for a complete installation is included with every lighting system!

NOTE: microBRAKE™ 6 LED Controller is not compatible with the Remote Power Switch (#5090).

- BRIGHTEST LEDs INDUSTRY WIDE
- DUAL INTENSITY BRAKE LIGHT ACTION
- SIMPLE & EASY INSTALLATION
- POWERS DIRECTLY FROM THE RX
- ALL MOUNTING HARDWARE INCLUDED
- FAST BODY REMOVAL
- LIFETIME WARRANTY ON EVERY LED

Includes

	Replacement P/N
Instruction Set	-
(1) microBRAKE™ 6 LED controller	#5052	LED CONTROLLER
(1) RX Pass-Thru™	#5074	POWER SOURCE
(1) 1-Channel RX Plug	#5076	POWER SOURCE
(4) 4" wire extensions	#5390-4	WIRE LENGTHS
(2) 24" wire extensions	#5390-24	WIRE LENGTHS
(4) 3mm white headlights	#5280-W	LED SIZES & COLORS
(2) 3mm red tail lights	#5280-R	LED SIZES & COLORS
(6) chrome 3mm LED holders	#5081-3	INSTALLATION HARDWARE
(6) 2P connector housings	-
(1) 1.25"x0.5" aluminum tape x18	#5081-3
(1) 3.75"x3" aluminum tape	#5080
(8) zip ties & bases	#5080

UPC# 813487010703

Specs

SYSTEM CURRENT DRAW (@6V): 90mA with brake lights dim; 120mA with all LEDs fully bright
(A standard servo draws approx. 350mA)

LED Controller
INPUT VOLTAGE: 3.6-7.4V [6V Optimal]
TYP OUTPUT CURRENT (per LED channel): 20-30mA
DIMENSIONS: 1.3" x 0.6" x 0.3"

Blue, Green, White, White Strobe, Red Strobe LEDs
FORWARD VOLTAGE: 3.2V
MAX CURRENT: 30mA

Amber, Red LEDs
FORWARD VOLTAGE: 1.9V
MAX CURRENT: 30mA

Limited Lifetime Warranty

Every RC-LIGHTS LED is guaranteed against manufacturer defect for the lifetime of the LED (10 TEN Years). All system components are guaranteed against manufacturer defect for 2 TWO Years after the original date of purchase. Should your LED ever not light contact us immediately and a replacement will be sent right away. Warranty does not cover damage due to powering the LED beyond specified ratings. Warranty does not cover damage due to an incorrect installation. Warranty does not cover normal wear, abuse, neglect, or any damage arising as a result of improper use or modification.

Installation Instructions

Quick Start Guide
Step-by-Step
microBRAKE™ 6 LED Controller
microBRAKE™ 6 LED Controller TECH SHEET
LED-to-Plug and Play Connector
LED-to-RPM Canister
Wiring Diagram
LED Specs
Complete Set (.PDF)
>>> SUPPORT INDEX <<<

Customize Your Lighting System

Change LED Sizes/Colors

Any LED included with this lighting system can be replaced with any size or color LED available exclusively through RC-LIGHTS.

Sizes: 3mm, 5mm
Constant Colors: Blue, Amber, Green, White, Red
Strobing Colors: White, Red

Parts Required: LEDs (#528*-* or #529*-*)

Change/Extend Wire Lengths

Any wire extension included with this lighting system can be replaced or extended with any length wire extension.

Lengths: 4" [100mm], 6" [150mm], 8" [200mm], 14" [350mm], 24" [600mm]

Parts Required: Wire Extensions (#5390-*)

Add Additional LEDs

To add additional LEDs beyond the limits of the LED controller use additional LED controllers and power using additional power source.

Parts Required: LED Controllers

Optional Power Sources

For long run hours (24+) use a 3AA battery holder (with built-in power switch; #5071)
To run off a 9V battery use a 9V battery clip (#5072)

Parts Required: Power Sources (#5071-#5072)

Product Reviews

Easy to install, nice view

Posted by Unknown on 25th Jun 2011

I ordered this set a couple of weeks ago for my Slash. The installation was for a well known modellbuilder no problem at all. After preparing all the wires with the leds the next step is quite simple: just plug the leds into the controller, power up the controller with the y-cable and teh fun will begin!

Excelent set if you want to light up your RC model with real working brake-lights.

Greetings from Germany