Loading... Please wait...



Lights are designed to be used in extreme nighttime and low visibility running environments and are very high output.

DO NOT look directly
into beam.

Our Newsletter

Subscribe to receive
New Product Release &
Promotional e-mails.

#5006: Dual Head & Electronic Brake Lights [5MM, 14"]

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
List:
$90.00
Your Price:
$54.99
SKU:
RCL5006
Quantity:


THIS COMPLETE SYSTEM BUNDLES


5052and
Qty 1
5074and
Qty 1
5390-14and
Qty 6
5290-Wand
Qty 4
5290-Rand
Qty 2
5082and
Qty 6
  5081and
Qty 6
Complete Mounting Kit

Guarantee

microBRAKE 6 LED Dual Head

Use RCL5006 to install 4 white dual headlights and 2 red dual-intensity electronic brake lights to any 1:12 to 1:8 size R/C car. No extra channels, with included microBRAKE™ - 6 LED controller.  This controller has EBS functionality built right in for a streamlined installation on the most common setup for R/C cars & trucks.

Powered directly from the RX throttle channel using the included RX Pass-Thru™.

To change headlight or tail light colors use 5mm or 3mm LEDs.

3mm version available; #106-MB.

Everything needed for a complete installation is included with every lighting system!

NOTE: microBRAKE™ 6 LED Controller is not compatible with the Remote Power Switch (#5090).

- BRIGHTEST LEDs INDUSTRY WIDE
- DUAL INTENSITY BRAKE LIGHT ACTION
- SIMPLE & EASY INSTALLATION
- POWERS DIRECTLY FROM THE RX
- ALL MOUNTING HARDWARE INCLUDED
- FAST BODY REMOVAL
- LIFETIME WARRANTY ON EVERY LED

Includes

   Replacement P/N  
 Instruction Set  -  
 (1) microBRAKE™ 6 LED controller #5052 LED CONTROLLER
 (1) RX Pass-Thru™ #5074 POWER SOURCE
 (1) 1-Channel RX Plug #5076
 (6) 14" wire extensions #5390-14 WIRE LENGTHS
 (4) 5mm white headlights #5290-W LED SIZES & COLORS
 (2) 5mm red tail lights #5290-R
 (6) chrome 5mm LED holders #5081 INSTALLATION
HARDWARE
 (6) standard 5mm LED holders #5082
 (6) 2P connector housings -
 (1) 1.25"x0.5" aluminum tape x18 #5081
 (1) 3.75"x3" aluminum tape #5080
 (8) zip ties & bases #5080

microBRAKE 6 LED Dual HeadmicroBRAKE 6 LED Electronic Brake Lights
UPC# 813487010697


Specs

SYSTEM CURRENT DRAW (@6V): 90mA with brake lights dim; 120mA with all LEDs fully bright
(A standard servo draws approx. 350mA)

LED Controller
INPUT VOLTAGE: 3.6-7.4V [6V Optimal]
TYP OUTPUT CURRENT (per LED channel): 20-30mA
DIMENSIONS: 1.3" x 0.6" x 0.3"

Blue, Green, White, White Strobe, Red Strobe LEDs
FORWARD VOLTAGE: 3.2V
MAX CURRENT: 30mA

Amber, Red LEDs
FORWARD VOLTAGE: 1.9V
MAX CURRENT: 30mA


Limited Lifetime Warranty

Every RC-LIGHTS LED is guaranteed against manufacturer defect for the lifetime of the LED (10 TEN Years). All system components are guaranteed against manufacturer defect for 2 TWO Years after the original date of purchase.  Should your LED ever not light contact us immediately and a replacement will be sent right away. Warranty does not cover damage due to powering the LED beyond specified ratings. Warranty does not cover damage due to an incorrect installation. Warranty does not cover normal wear, abuse, neglect, or any damage arising as a result of improper use or modification.


Installation Instructions

Quick Start Guide
Step-by-Step
microBRAKE™ 6 LED Controller
microBRAKE™ 6 LED Controller TECH SHEET
LED-to-Plug and Play Connector
LED-to-Body
Wiring Diagram
LED Specs
Complete Set (.PDF)
>>> SUPPORT INDEX <<<

Customize Your Lighting System


Change LED Sizes/Colors

Any LED included with this lighting system can be replaced with any size or color LED available exclusively through RC-LIGHTS.

Sizes: 3mm, 5mm
Constant Colors: Blue, Amber, Green, White, Red
Strobing Colors: White, Red

Parts Required: LEDs (#528*-* or #529*-*)

Change/Extend Wire Lengths

Any wire extension included with this lighting system can be replaced or extended with any length wire extension.

Lengths: 4" [100mm], 6" [150mm], 8" [200mm], 14" [350mm], 24" [600mm]

Parts Required: Wire Extensions (#5390-*)

Add Additional LEDs

To add additional LEDs beyond the limits of the LED controller use additional LED controllers and power using additional power source.

Parts Required: LED Controllers

Optional Power Sources

  • For long run hours (24+) use a 3AA battery holder (with built-in power switch; #5071)
  • To run off a 9V battery use a 9V battery clip (#5072)
Parts Required: Power Sources (#5071-#5072)
Write your own product review

Product Reviews

  1. Looks great and super bright !

    Posted by Unknown on 11th Feb 2012

    Bought these for my RC10 T4.1 and they look great. I use them on a 2s lipo and cant tell a change in battery life. Work great day or night. Having the brake light option is so cool. my friends have all now installed lights on their trucks. My truck is a RTR and setup took only 45MIN. It was better to install them on the body rather then the chassis


Customers Who Viewed This Product Also Viewed

Free Shipping
Offer

All orders over $99.00
ship anywhere in the world
for FREE!

Add to Wish List

Click the button below to add the RCL5006 to your wish list.