Directly power up to 14 LEDs. Current limiting resistors are built right in.
Using the 911STROBE™ 14 LED Controller, LEDs can be directly powered from the throttle channel of the RX using the included RX Pass-Thru™ (mini Y-harness).
Dual intensity brake light action is built right in! Throttle channel input fully reversible.
Fully-adjustable rate alternating roof strobe lights.
Auxiliary channel input can be used to switch power ON/OFF to the entire unit from a 2-position switch on the TX or it can be used to turn the "lights" ON/OFF so that headlights are constant and strobes are OFF until the switch is flipped then the headlights strobe and the roof strobes turn on.
LEDs are split into five banks: 4 constant/strobing headlights (2 each side R & L; headlight strobe rate fully-adjustable); 8 roof strobes (4 each side R & L; roof strobe rate fully-adjustable); and 2 switched dim or full bright depending on throttle stick position (GAS or BRAKE.)
Throttle and auxiliary center-stick auto-detect for precise lighting effects every time.
Full-feature functionality built right in: headlight strobes, roof strobes, and dual intensity brake lights for the ultimate in scale lighting effects for any scale police / emergency vehicle body.
Bundled with this complete system: #5024
|(1) 911STROBE™ 14 LED controller|
|(1) RX Pass-Thru™|
|(1) 2-Channel RX Plug|
|(2) zip ties & bases|
DIMENSIONS: 1.65" x 1.0" x 0.25"
INPUT VOLTAGE: 3.6-7.4V [6V Optimal]
TYP OUTPUT CURRENT (per LED channel): 20-30mA
Controller pins can be directly soldered to for DIY projects. Use heat shrink to insulate each pin.
Every RC-LIGHTS LED is guaranteed against manufacturer defect for the lifetime of the LED (10 TEN Years). All system components are guaranteed against manufacturer defect for 2 TWO Years after the original date of purchase. Should your LED ever not light contact us immediately and a replacement will be sent right away. Warranty does not cover damage due to powering the LED beyond specified ratings. Warranty does not cover damage due to an incorrect installation. Warranty does not cover normal wear, abuse, neglect, or any damage arising as a result of improper use or modification.