Dual-intensity brake light action just like a real car!
Universal solution for all R/C cars & trucks, nitros & electrics. No more mechanical switches!
Auto-detect ON point to adjust for any trim settings.
Installs in-line with throttle servo or ESC. Plug Electronic Brake Switch into throttle channel on RX (receiver); plug throttle servo or ESC into brake switch.
Power from the RX is supplied to the LED controller through the electronic brake switch.
DIP Switches - enable or disable these features
CENTER-STICK: Changes if the brake lights are at normal or full intensity at center-stick
REVERSIBLE: Changes which direction of the throttle trigger is ON
Use the 3 wire power plug with a LED controller for constant power to Bank #1 and dual-intensity power to Bank #2.
Discard 3 wire power plug or save for future use if using with a RX Direct2LED™.
|(1) electronic brake switch|
|(1) 1-Channel RX plug|
|(2) zip ties & bases|
CURRENT DRAW (@6V): 1mA (10mA when output is switched on)
INPUT VOLTAGE: 4.0-6.0V
MAX OUTPUT CURRENT: 120mA
Every RC-LIGHTS LED is guaranteed against manufacturer defect for the lifetime of the LED (10 TEN Years). All system components are guaranteed against manufacturer defect for 2 TWO Years after the original date of purchase. Should your LED ever not light contact us immediately and a replacement will be sent right away. Warranty does not cover damage due to powering the LED beyond specified ratings. Warranty does not cover damage due to an incorrect installation. Warranty does not cover normal wear, abuse, neglect, or any damage arising as a result of improper use or modification.