RCL5316

#5316 : Navigation + Strobes [5MM, 14", RGW+2WS1RS]

List:

~~$89.00~~

Your Price:

$69.99

SKU:

RCL5316

THIS COMPLETE SYSTEM BUNDLES

Guarantee

Use RCL5316 to install red, green & white directional navigation lights; and 2 white wingtip, 1 red rotating beacon strobe lights to any 28" span R/C airplane, helicopter, or boat with 4 extra constant LED channels for adding accessory lights (additional nav, additional strobes, or landing lights using #5412-E). Use wire extensions for larger scale craft.

Powered directly from the RX or optional battery source

To add landing lights activated from the TX use #5412-E .

Everything needed for a complete installation is included with every lighting system!

- BRIGHTEST LEDs INDUSTRY WIDE
- SIMPLE & EASY INSTALLATION
- POWERS DIRECTLY FROM THE RX
- ALL MOUNTING HARDWARE INCLUDED
- FAST BODY REMOVAL
- LIFETIME WARRANTY ON EVERY LED

Includes

	Replacement P/N
Instruction Set	-
(1) standard 10 LED controller	#5051	LED CONTROLLER
(1) RX plug	#5073	POWER SOURCE
(6) 14" wire extensions	#5390-14	WIRE LENGTHS
(1) 5mm red constant LED	#5290-R	LED SIZES & COLORS
(1) 5mm green constant LED	#5290-G
(1) 5mm white constant LED	#5290-W
(2) 5mm white strobe LED	#5291-W
(1) 5mm red strobe LED	#5291-R
(6) chrome 5mm LED holders	#5081	INSTALLATION HARDWARE
(6) standard 5mm LED holders	#5082
(1) 1.25"x0.5" aluminum tape x18	#5081
(1) 3.75"x3" aluminum tape	#5080
(8) zip ties & bases	#5080

UPC# 813487010093

Specs

SYSTEM CURRENT DRAW (@6V): 90mA
(A standard servo draws approx. 350mA)

LED Controller
INPUT VOLTAGE: 3.6-7.4V [6V Optimal]
TYP OUTPUT CURRENT (per LED channel): 20-30mA

Blue, Green, White, White Strobe, Red Strobe LEDs
FORWARD VOLTAGE: 3.2V
MAX CURRENT: 30mA

Amber, Red LEDs
FORWARD VOLTAGE: 1.9V
MAX CURRENT: 30mA

Limited Lifetime Warranty

Every RC-LIGHTS LED is guaranteed against manufacturer defect for the lifetime of the LED (10 TEN Years). All system components are guaranteed against manufacturer defect for 2 TWO Years after the original date of purchase. Should your LED ever not light contact us immediately and a replacement will be sent right away. Warranty does not cover damage due to powering the LED beyond specified ratings. Warranty does not cover damage due to an incorrect installation. Warranty does not cover normal wear, abuse, neglect, or any damage arising as a result of improper use or modification.

Installation Instructions

Quick Start Guide
Step-by-Step
Standard 10 LED Controller
Standard 10 LED Controller TECH SHEET
LED-to-Plug and Play Connector
LED-to-Canopy
Wiring Diagram
LED Specs
Complete Set (.PDF)
>>> SUPPORT INDEX <<<

Customize Your Lighting System

Change LED Sizes/Colors

Any LED included with this lighting system can be replaced with any size or color LED available exclusively through RC-LIGHTS.

Sizes: 3mm, 5mm
Constant Colors: Blue, Amber, Green, White, Red
Strobing Colors: White, Red

Parts Required: LEDs (#528*-* or #529*-*)

Change/Extend Wire Lengths

Any wire extension included with this lighting system can be replaced or extended with any length wire extension.

Lengths: 4" [100mm], 6" [150mm], 8" [200mm], 14" [350mm], 24" [600mm]

Parts Required: Wire Extensions (#5390-*)

Add Additional LEDs

Any available LED1-6 or AUX1-4 channel on the LED controller can be used to add an additional LED.

Parts Required: LEDs (#528*-* or #529*-*) + Wire Extensions (#5390-*)

To add additional LEDs beyond the limits of the LED controller use additional LED controllers and power using LINK channels.

Parts Required: LED Controllers (#5051 or #5075)

Optional Power Sources

If an extra channel is not available on your RX you will need a Y-harness or a RX Pass-Thru™ (#5074)
Turn lights on/off from an available channel on the RX/TX 2-position switch (#5090)
For long run hours (24+) use a 3AA battery holder (with built-in power switch; #5071)
To run off a 9V battery use a 9V battery clip (#5072)

Parts Required: Electronic Control Switches (#5090) or Power Sources (#5071-#5074)