Loading... Please wait...



Lights are designed to be used in extreme nighttime and low visibility running environments and are very high output.

DO NOT look directly
into beam.

Our Newsletter

Subscribe to receive
New Product Release &
Promotional e-mails.

#5324 : NIGHTFLY™ 14 LED NAVIGATION SYSTEM [5MM, 14”/24"]

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
List:
$180.00
Your Price:
$109.99
SKU:
RCL5324
Quantity:
Bookmark and Share


THIS COMPLETE SYSTEM BUNDLES


5056and
Qty 1
5076and
Qty 1
5390-24and
Qty 6
5390-14and
Qty 8
5290-Wand
Qty 8
5290-Gand
Qty 2
  5290-Rand
Qty 4
5082and
Qty 14
5081and
Qty 14
Complete Mounting Kit

Guarantee

RC-Lights 5324 14 LED NAV

Use RCL5324 to install 2 red & 2 green directional navigation lights; 2 white adjustable wingtip strobes; 2 white adjustable tail strobes; 2 red adjustable rotating beacon strobe lights; and 4 white landing lights (switched from the TX) to any 48" span R/C airplane, helicopter, or boat. Includes the NIGHTFLY™ 14 LED Controller that can be switched on/off from the TX using a spare 2-position switch. Use wire extensions for larger scale craft.

Powered directly from the RX or optional battery source.

Everything needed for a complete installation is included with every lighting system!

- BRIGHTEST LEDs INDUSTRY WIDE
- ADJUSTABLE RATE STROBES & BEACON
- TX/RX CONTROL BUILT RIGHT IN
- SIMPLE & EASY INSTALLATION
- POWERS DIRECTLY FROM THE RX
- ALL MOUNTING HARDWARE INCLUDED
- FAST BODY REMOVAL
- LIFETIME WARRANTY ON EVERY LED

Includes

   Replacement P/N  
 Instruction Set  -  
 (1) NIGHTFLY™ 14 LED controller #5056 LED CONTROLLER
 (1) 2-Channel RX Plug #5076 POWER SOURCE
 (8) 14" wire extensions #5390-14 WIRE LENGTHS
 (6) 24" wire extensions #5390-24
 (4) 5mm red constant LED #5290-R LED SIZES & COLORS
 (2) 5mm green constant LED #5290-G
 (8) 5mm white constant LED #5290-W
 (14) chrome 5mm LED holders #5081 INSTALLATION
HARDWARE
 (14) standard 5mm LED holders #5082
 (14) 2P connector housings -
 (1) 1.25"x0.5" aluminum tape x18 #5081
 (1) 3.75"x3" aluminum tape #5080
 (16) zip ties & bases #5080



UPC# 813487010741


Specs

SYSTEM CURRENT DRAW (@6V): 110mA with landing lights off; 170mA with landing lights on
(A standard servo draws approx. 350mA)

LED Controller
INPUT VOLTAGE: 3.6-7.4V [6V Optimal]
TYP OUTPUT CURRENT (per LED channel): 20-30mA 
DIMENSIONS: 1.65" x 1.0" x 0.25"

Blue, Green, White, White Strobe, Red Strobe LEDs
FORWARD VOLTAGE: 3.2V
MAX CURRENT: 30mA

Amber, Red LEDs
FORWARD VOLTAGE: 1.9V
MAX CURRENT: 30mA


Limited Lifetime Warranty

Every RC-LIGHTS LED is guaranteed against manufacturer defect for the lifetime of the LED (10 TEN Years). All system components are guaranteed against manufacturer defect for 2 TWO Years after the original date of purchase.  Should your LED ever not light contact us immediately and a replacement will be sent right away. Warranty does not cover damage due to powering the LED beyond specified ratings. Warranty does not cover damage due to an incorrect installation. Warranty does not cover normal wear, abuse, neglect, or any damage arising as a result of improper use or modification.


Installation Instructions

Quick Start Guide
Step-by-Step
NIGHTFLY™ 14 LED Controller
NIGHTFLY™ 14 LED Controller TECH SHEET
LED-to-Plug and Play Connector
LED-to-Canopy
Wiring Diagram
LED Specs
Complete Set (.PDF)
>>> SUPPORT INDEX <<<

Customize Your Lighting System


Change LED Sizes/Colors

Any LED included with this lighting system can be replaced with any size or color LED available exclusively through RC-LIGHTS.

Sizes: 3mm, 5mm
Constant Colors: Blue, Amber, Green, White, Red
Strobing Colors: White, Red

Parts Required: LEDs (#528*-* or #529*-*)

Change/Extend Wire Lengths

Any wire extension included with this lighting system can be replaced or extended with any length wire extension.

Lengths: 4" [100mm], 6" [150mm], 8" [200mm], 14" [350mm], 24" [600mm]

Parts Required: Wire Extensions (#5390-*)

Add Additional LEDs

To add additional LEDs beyond the limits of the LED controller use additional LED controllers and power using additional power source.

Parts Required: LED Controllers

Optional Power Sources

  • For long run hours (24+) use a 3AA battery holder (with built-in power switch; #5071)
  • To run off a 9V battery use a 9V battery clip (#5072)
Parts Required: Power Sources (#5071-#5072)
Write your own product review

Product Reviews

  1. they are working as advertised, and as expected

    Posted by Bob Barnett on 2nd Aug 2012

    I have about 10 flights on my night flyer plane and find that these lights work every bit as well as I could've hoped! They have a very scale like impression when you see them in the air. The flashing strobes are my favorite, but they all work fine. I intend to order another set for my next scale project.


  2. Even better than expected!

    Posted by Courtney on 9th Oct 2011

    I am so happy with these LED lights, I'm planning to add some to other planes I have. The LED's are very bright even in the daytime! This is my first time working with LED's but installing was very easy following the included directions. Couldn't be happier with this purchase..worth the money! Thanks!!!


Customers Who Viewed This Product Also Viewed

Free Shipping
Offer

All orders over $99.00
ship anywhere in the world
for FREE!

Add to Wish List

Click the button below to add the RCL5324 to your wish list.

You Recently Viewed...