THIS COMPLETE SYSTEM BUNDLES
Use RCL5331 to install 1 red, 1 green, and 1 white directional navigation lights; 1 white landing light (switched from the TX); and 2 white & 2 red adjustable alternating strobe lights to any 450 size R/C helicopter. Includes the NIGHTFLY2™ 14 LED Controller that can be switched on/off from the TX using a spare 2-position switch. Use wire extensions for larger scale craft.
Powered directly from the RX or optional battery source.
Everything needed for a complete installation is included with every lighting system!
- BRIGHTEST LEDs INDUSTRY WIDE
- ADJUSTABLE RATE ALTERNATING STROBES & BEACON
- MULTI-MODE TX/RX CONTROL BUILT RIGHT IN
- SIMPLE & EASY INSTALLATION
- POWERS DIRECTLY FROM THE RX
- ALL MOUNTING HARDWARE INCLUDED
- FAST BODY REMOVAL
- LIFETIME WARRANTY ON EVERY LED
|(1) NIGHTFLY2™ 14 LED controller||#5057||LED CONTROLLER|
|(1) 2-Channel RX Plug||#5076||POWER SOURCE|
|(7) 14" wire extensions||#5390-14||WIRE LENGTHS|
|(1) 24" wire extensions||#5390-24|
|(3) 5mm red constant LED||#5290-R||LED SIZES & COLORS|
|(1) 5mm green constant LED||#5290-G|
|(4) 5mm white constant LED||#5290-W|
|(8) chrome 5mm LED holders||#5081||INSTALLATION
|(8) standard 5mm LED holders||#5082|
|(8) 2P connector housings||-|
|(1) 1.25"x0.5" aluminum tape x18||#5081|
|(1) 3.75"x3" aluminum tape||#5080|
|(10) zip ties & bases||#5080|
SYSTEM CURRENT DRAW (@6V): 65mA with landing light OFF, nav, beacon, strobes ON; 80mA with landing light ON; 140mA with all lights constant ON
(A standard servo draws approx. 350mA)
INPUT VOLTAGE: 3.6-7.4V [6V Optimal]
TYP OUTPUT CURRENT (per LED channel): 20-30mA
DIMENSIONS: 1.65" x 1.0" x 0.25"
Blue, Green, White, White Strobe, Red Strobe LEDs
FORWARD VOLTAGE: 3.2V
MAX CURRENT: 30mA
Amber, Red LEDs
FORWARD VOLTAGE: 1.9V
MAX CURRENT: 30mA
Every RC-LIGHTS LED is guaranteed against manufacturer defect for the lifetime of the LED (10 TEN Years). All system components are guaranteed against manufacturer defect for 2 TWO Years after the original date of purchase. Should your LED ever not light contact us immediately and a replacement will be sent right away. Warranty does not cover damage due to powering the LED beyond specified ratings. Warranty does not cover damage due to an incorrect installation. Warranty does not cover normal wear, abuse, neglect, or any damage arising as a result of improper use or modification.
Quick Start Guide
NIGHTFLY2™ 14 LED Controller
NIGHTFLY2™ 14 LED Controller TECH SHEET
LED-to-Plug and Play Connector
Complete Set (.PDF)
>>> SUPPORT INDEX <<<
Posted by Jeff on 27th Aug 2014
Love the lights and the realism they provide. I'm a visual guy so the written directions seemed to over complicate what is a very simple set-up process. Once I "got it" installation was super easy. Much nicer than the stock light set-ups that are provided with some RCA heli kits.