Loading... Please wait...
Universal
R/C LED Systems
Lights are designed to be used in extreme nighttime and low visibility running environments and are very high output.
DO NOT look directly
into beam.
Our Newsletter
New Product Release &
Promotional e-mails.
#5334 : NIGHTFLY2™ 14 LED WARBIRD NAVIGATION SYSTEM [5MM, 14”/24"]
THIS COMPLETE SYSTEM BUNDLES
    |
 |
  |
  |
  |
 |
 |
  |
  |
 |
 |
|
Use RCL5334 to install 1 red, 1 green, and 2 white directional navigation lights; 2 red adjustable rotating beacon strobe lights; and 8 amber simulated machine gun lights (switched from the TX) to any 48" span R/C warbird airplane. Includes the NIGHTFLY2™ 14 LED Controller that can be switched on/off from the TX using a spare 2-position switch. Use wire extensions for larger scale craft.
Powered directly from the RX or optional battery source.
Everything needed for a complete installation is included with every lighting system!
- BRIGHTEST LEDs INDUSTRY WIDE
- ADJUSTABLE RATE MACHINE GUN STROBES & BEACON
- MULTI-MODE TX/RX CONTROL BUILT RIGHT IN
- SIMPLE & EASY INSTALLATION
- POWERS DIRECTLY FROM THE RX
- ALL MOUNTING HARDWARE INCLUDED
- FAST BODY REMOVAL
- LIFETIME WARRANTY ON EVERY LED
Includes
| Replacement P/N | ||
| Instruction Set | - | |
| (1) NIGHTFLY2™ 14 LED controller | #5057 | LED CONTROLLER |
| (1) 2-Channel RX Plug | #5076 | POWER SOURCE |
| (8) 14" wire extensions | #5390-14 | WIRE LENGTHS |
| (6) 24" wire extensions | #5390-24 | |
| (3) 5mm red constant LED | #5290-R | LED SIZES & COLORS |
| (1) 5mm green constant LED | #5290-G | |
| (2) 5mm white constant LED | #5290-W | |
| (8) 3mm amber constant LED | #5280-A | |
| (8) chrome 3mm LED holders | #5081-3 | INSTALLATION HARDWARE |
| (6) chrome 5mm LED holders | #5081 | |
| (8) standard 3mm LED holders | #5082-3 | |
| (6) standard 5mm LED holders | #5082 | |
| (14) 2P connector housings | - | |
| (1) 1.25"x0.5" aluminum tape x18 | #5081 | |
| (1) 3.75"x3" aluminum tape | #5080 | |
| (16) zip ties & bases | #5080 |
UPC# 813487010840
Specs
SYSTEM CURRENT DRAW (@6V): 70mA with nav lights ON; 90mA with nav lights and beacons ON; 115mA with nav, beacons, and machine gun strobes ON; 270mA with all lights constant ON
(A standard servo draws approx. 350mA)
LED Controller
INPUT VOLTAGE: 3.6-7.4V [6V Optimal]
TYP OUTPUT CURRENT (per LED channel): 20-30mA
DIMENSIONS: 1.65" x 1.0" x 0.25"
Blue, Green, White, White Strobe, Red Strobe LEDs
FORWARD VOLTAGE: 3.2V
MAX CURRENT: 30mA
Amber, Red LEDs
FORWARD VOLTAGE: 1.9V
MAX CURRENT: 30mA
Limited Lifetime Warranty
Every RC-LIGHTS LED is guaranteed against manufacturer defect for the lifetime of the LED (10 TEN Years). All system components are guaranteed against manufacturer defect for 2 TWO Years after the original date of purchase. Should your LED ever not light contact us immediately and a replacement will be sent right away. Warranty does not cover damage due to powering the LED beyond specified ratings. Warranty does not cover damage due to an incorrect installation. Warranty does not cover normal wear, abuse, neglect, or any damage arising as a result of improper use or modification.
Installation Instructions
Quick Start Guide
Step-by-Step
NIGHTFLY2™ 14 LED Controller
NIGHTFLY2™ 14 LED Controller TECH SHEET
LED-to-Plug and Play Connector
LED-to-Canopy
Wiring Diagram
LED Specs
Complete Set (.PDF)
>>> SUPPORT INDEX <<<
Customize Your Lighting System
Change LED Sizes/Colors
Any LED included with this lighting system can be replaced with any size or color LED available exclusively through RC-LIGHTS.Sizes: 3mm, 5mm
Constant Colors: Blue, Amber, Green, White, Red
Strobing Colors: White, Red
Parts Required: LEDs (#528*-* or #529*-*)
Change/Extend Wire Lengths
Any wire extension included with this lighting system can be replaced or extended with any length wire extension.Lengths: 4" [100mm], 6" [150mm], 8" [200mm], 14" [350mm], 24" [600mm]
Parts Required: Wire Extensions (#5390-*)
Add Additional LEDs
To add additional LEDs beyond the limits of the LED controller use additional LED controllers and power using additional power source.Parts Required: LED Controllers
Optional Power Sources
- For long run hours (24+) use a 3AA battery holder (with built-in power switch; #5071)
- To run off a 9V battery use a 9V battery clip (#5072)
Free Shipping
Offer
ship anywhere in the world
for FREE!