RCL5412E

#5412-E : Electronic HEAD/LANDING Lights - White [5MM, 14"]

Price:

$55.00

SKU:

RCL5412E

Use RCL5412E to add 2 white headlights to any 1:12 to 1:8 size R/C car or truck with 1 extra constant LED channel for adding an additional headlight. RPS switch is included for turning the headlights on/off from a 3rd channel on the RX. RPS has a set of spare output pins for switching up to 6 LEDs using #5499.

OR

Use RCL5412E to install 2 white landing lights to any 28" span R/C airplane or helicopter (or dock lights for boats) with 1 extra constant LED channel for adding an additional landing light. RPS switch is included for turning the landing lights on/off from a 3rd channel on the RX. RPS has a set of spare output pins for switching up to 6 LEDs using #5491. Use wire extensions for larger scale craft.

Powered directly from the RX or optional battery source.

COMBO: #5499 + #5090

To change headlight / landing light colors use 5mm or 3mm LEDs.

Everything needed for a complete installation is included with every lighting system!

- BRIGHTEST LEDs INDUSTRY WIDE
- TURN ON/OFF FROM TX CHANNEL
- SIMPLE & EASY INSTALLATION
- POWERS DIRECTLY FROM THE RX
- ALL MOUNTING HARDWARE INCLUDED
- FAST BODY REMOVAL
- LIFETIME WARRANTY ON EVERY LED

Includes

	Replacement P/N
Instruction Set	-
(1) RX Direct2LED™	#5075	LED CONTROLLER
(1) remote power switch	#5090	POWER SOURCE
(2) 14" wire extensions	#5390-14	WIRE LENGTHS
(2) 5mm white headlights	#5290-W	LED SIZES & COLORS
(2) standard 5mm LED holders	#5082	INSTALLATION HARDWARE
(2) 2P connector housings	-
(1) 3.75"x3" aluminum tape	#5080
(4) zip ties & bases	#5080

UPC# 813487010628

Specs

SYSTEM CURRENT DRAW (@6V): 45mA
(A standard servo draws approx. 350mA)

RX Direct2LED™
INPUT VOLTAGE: 3.6-7.4V [6V Optimal]
TYP OUTPUT CURRENT (per LED channel): 20-30mA

Remote Power Switch
INPUT VOLTAGE: 4.8-6.0V
MAX OUTPUT CURRENT: 1.2A

Blue, Green, White, White Strobe, Red Strobe LEDs
FORWARD VOLTAGE: 3.2V
MAX CURRENT: 30mA

Amber, Red LEDs
FORWARD VOLTAGE: 1.9V
MAX CURRENT: 30mA

Limited Lifetime Warranty

Every RC-LIGHTS LED is guaranteed against manufacturer defect for the lifetime of the LED (10 TEN Years). All system components are guaranteed against manufacturer defect for 2 TWO Years after the original date of purchase. Should your LED ever not light contact us immediately and a replacement will be sent right away. Warranty does not cover damage due to powering the LED beyond specified ratings. Warranty does not cover damage due to an incorrect installation. Warranty does not cover normal wear, abuse, neglect, or any damage arising as a result of improper use or modification.

Installation Instructions

Step-by-Step
RX Direct2LED™ 3 LED Controller
LED-to-PnP Connector
LED-to-Body
Remote Power Switch
Wiring Diagram
LED Specs
Complete Set (.PDF)
>>> SUPPORT INDEX <<<

Use to install 2 white headlights that can be turned on/off from an available channel on the TX/RX, powered directly from the RX or optional battery source

COMBO: #5499 + #5090

Customize Your Lighting System

Change LED Sizes/Colors

Any LED included with this lighting system can be replaced with any size or color LED available exclusively through RC-LIGHTS.

Sizes: 3mm, 5mm
Constant Colors: Blue, Amber, Green, White, Red
Strobing Colors: White, Red

Parts Required: LEDs (#528*-* or #529*-*)

Change/Extend Wire Lengths

Any wire extension included with this lighting system can be replaced or extended with any length wire extension.

Lengths: 4" [100mm], 6" [150mm], 8" [200mm], 14" [350mm], 24" [600mm]

Parts Required: Wire Extensions (#5390-*)

Add Additional LEDs

Any available channel on the RX Direct2LED™ can be used to add an additional LED.

Parts Required: LEDs (#528*-* or #529*-*) + Wire Extensions (#5390-*)

To add additional LEDs beyond the limits of the LED controller use additional LED controllers.

Parts Required: LED Controllers (#5051 or #5075)