RCL5491

#5491 : LED Single - White Strobe [5MM, 24"]

List:

~~$18.95~~

Your Price:

$11.99

SKU:

RCL5491

THIS COMPLETE SYSTEM BUNDLES

Guarantee

Use RCL5491 to install 1 white strobe light to any R/C airplane, helicopter, or boat with 2 extra constant LED channels for adding accessory lights (navigation, landing). 24" wire extension is included. Use wire extensions for larger scale craft.

Powered directly from the RX or optional battery source

To change LED size or color use 5mm or 3mm LEDs.

Everything needed for a complete installation is included with every lighting system!

- BRIGHTEST LEDs INDUSTRY WIDE
- SIMPLE & EASY INSTALLATION
- POWERS DIRECTLY FROM THE RX
- ALL MOUNTING HARDWARE INCLUDED
- FAST BODY REMOVAL
- LIFETIME WARRANTY ON EVERY LED

Includes

	Replacement P/N
Instruction Set	-
(1) RX Direct2LED™	#5075	LED CONTROLLER & POWER SOURCE
(1) 24" wire extensions	#5390-24	WIRE LENGTHS
(1) 5mm white strobe LED	#5291-W	LED SIZES & COLORS
(1) chrome 5mm LED holders	#5081	INSTALLATION HARDWARE
(1) standard 5mm LED holders	#5082
(1) 1.25"x0.5" aluminum tape x18	#5081
(1) 3.75"x3" aluminum tape	#5080
(2) zip ties & bases	#5080

UPC# 813487010581

Specs

SYSTEM CURRENT DRAW (@6V): 10mA
(A standard servo draws approx. 350mA)

RX Direct2LED™
INPUT VOLTAGE: 3.6-7.4V [6V Optimal]
TYP OUTPUT CURRENT (per LED channel): 20-30mA

Blue, Green, White, White Strobe, Red Strobe LEDs
FORWARD VOLTAGE: 3.2V
MAX CURRENT: 30mA

Amber, Red LEDs
FORWARD VOLTAGE: 1.9V
MAX CURRENT: 30mA

Limited Lifetime Warranty

Every RC-LIGHTS LED is guaranteed against manufacturer defect for the lifetime of the LED (10 TEN Years). All system components are guaranteed against manufacturer defect for 2 TWO Years after the original date of purchase. Should your LED ever not light contact us immediately and a replacement will be sent right away. Warranty does not cover damage due to powering the LED beyond specified ratings. Warranty does not cover damage due to an incorrect installation. Warranty does not cover normal wear, abuse, neglect, or any damage arising as a result of improper use or modification.

Installation Instructions

Quick Start Guide
Step-by-Step
RX Direct2LED™ 3 LED Controller
LED-to-Plug and Play Connector
LED-to-Canopy
Wiring Diagram
LED Specs
Complete Set (.PDF)
>>> SUPPORT INDEX <<<

Customize Your Lighting System

Change LED Sizes/Colors

Any LED included with this lighting system can be replaced with any size or color LED available exclusively through RC-LIGHTS.

Sizes: 3mm, 5mm
Constant Colors: Blue, Amber, Green, White, Red
Strobing Colors: White, Red

Parts Required: LEDs (#528*-* or #529*-*)

Change/Extend Wire Lengths

Any wire extension included with this lighting system can be replaced or extended with any length wire extension.

Lengths: 4" [100mm], 6" [150mm], 8" [200mm], 14" [350mm], 24" [600mm]

Parts Required: Wire Extensions (#5390-*)

Add Additional LEDs

Any available channel on the RX Direct2LED™ can be used to add an additional LED.

Parts Required: LEDs (#528*-* or #529*-*) + Wire Extensions (#5390-*)

To add additional LEDs beyond the limits of the LED controller use additional LED controllers.

Parts Required: LED Controllers (#5051 or #5075)

Optional Power Sources

If an extra channel is not available on your RX you will need a Y-harness or a RX Pass-Thru™ (#5074)
Turn lights on/off from an available channel on the RX/TX 2-position switch (#5090)
For long run hours (24+) use a 3AA battery holder (with built-in power switch; #5071)
To run off a 9V battery use a 9V battery clip (#5072)

Parts Required: Electronic Control Switches (#5090) or Power Sources (#5071-#5074)