| |
|
|
| |
The center-point of any
lighting system is the base. It powers the 5mm navigation lights as well as optional
landing lights. All base
systems REQUIRE A POWER SOURCE.
Everything else that is needed to completely install and
operate the lights is included with each set.
|
|
| |
| 3 LED -
NON FLASHING |
| |
FEATURES 1
WHITE, 1 RED AND 1 GREEN |
|
|
| 4 LED -
NON FLASHING |
| |
FEATURES 2
WHITE, 1 RED AND 1 GREEN |
|
|
|
| 5 LED -
NON FLASHING |
| |
FEATURES 3
WHITE, 1 RED AND 1 GREEN |
|
|
|
|
| |
The center-point of any
lighting system is the base. It powers the 5mm navigation lights as well as optional
landing lights. All base
systems REQUIRE A POWER SOURCE.
Everything else that is needed to completely install and
operate the lights is included with each set.
'h' designates helicopter sized
wires 14"/8"/6"/4"/4"/4". Standard wires are all 14".
|
|
| |
| 3 LED -
RANDOM FLASH |
| |
FEATURES 1
WHITE [FL], 1 RED AND 1 GREEN |
|
|
|
|
|
| 4 LED -
RANDOM FLASH |
| |
FEATURES 1 RED
[FL], 1 WHITE [FL], 1 RED AND 1 GREEN |
|
|
|
|
|
|
| 5 LED -
RANDOM FLASH |
| |
FEATURES 2 RED
[FL], 1 WHITE [FL], 1 RED AND 1 GREEN |
|
|
|
|
|
| 6 LED -
RANDOM FLASH |
| |
FEATURES 2 RED
[FL], 1 WHITE [FL], 1 WHITE, 1 RED AND 1
GREEN |
|
|
|
|
|
|
|
| |
Each set of 5mm landing lights plug
directly into any base system. Includes mounting tape
and LED holders. Mechanical switches must be placed on
a servo to activate them. Electronic switches plug
into any channel in the RX that is tied to a two position
switch on the TX.
NOTE: Electronic version
includes a switch that is a power source for any base
system.
'h' designates helicopter sized
wires 4". Standard wires are all 14".
|
|
| |
| 2 LED -
MECHANICAL |
| |
FEATURES 2
WHITE
w/ MECHANICAL SWITCH |
|
|
| 2 LED -
ELECTRONIC |
| |
FEATURES 2
WHITE
w/ ELECTRONIC SWITCH |
|
|
|
|
|
|
| 4 LED -
MECHANICAL |
| |
FEATURES 4
WHITE
w/ MECHANICAL SWITCH |
|
|
| 4 LED -
ELECTRONIC |
| |
FEATURES 4
WHITE
w/ ELECTRONIC SWITCH |
|
|
|
|
|
|
|
